Description

Product details

Loctite 574 - 250 ml (metal flange sealant) LOCTITE 574 seals close-fitting joints between rigid and semi-rigid metal faces and flanges. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance. Fills Gaps upto 0.25 mm High Oil Resistance 150°C Service Temperature Product description:LOCTITE 574 seals close fitting joints between rigid metal faces and flanges. The product cures when confined in theabsence of air between close fitting metal surfaces. Provides resistance to low pressures immediately after assembly of flanges. Features and Benefits Gasketing Product - general purpose. Ideal for use on machined and rigid metal flangesLOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.Excellent water and glycol resistanceIdeal for use on rigid metal parts, e.g. cast iron components and pump housingsHigh oil resistance Steps to achieve the best adhesive results:1. For best performance bond surfaces should be clean and free from grease.USE Loctite SF 70632. The product is designed for close fitting flanged parts with gaps up to 0,25 mm.3. Apply manually as a continuous bead or by screen printing to one surface of the flanges.4. Low pressures (<0.5 MPa) may be used when testing to confirm a complete seal immediately after assembly and before curing.5. Flanges should be tightened as soon as possible after assembly to avoid shimming. Storage:Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.Material removed from containers may be contaminated during use. Do not return product to the original container. Parameters:Shear strength on steel : 8,5 N/mm²,Time to get full strength at the gap 0,05 mm (22 °C)-Steel : 12 hours-Aluminum : 15 hours